Servo drive Brushless ASD-A2-1021-M for servomotor ECMA-C21010

ASD-A2 – monophase 1x230v

The ASDA-A2-M series of servo drives, is more advanced than the B2. For most CNC applications all these extra functions are not required. The A2 is very interesting for many other applications. It can be set into what’s called PR mode, internal position mode. In internal position mode it’s possible to attach for example a home switch, and you can then set parameters that will allow the drive + motor to home itself. Further you can set software limits of the range. Then you start a motion cycle by an event trigger switch. It is not like a PLC, it’s much more simple. But for many applications this can be very interesting. Since all the inteligence is onboard, you don’t need an extra PC or PLC or hours of programming.

Features and benefits :

Component features:

Delta Part nr: ASD-A2-1021-M
Keypad included
Connects directly to 220V single phase or 230V three phase
Connects directly to 1 or 3 x 230V (not to 3 x 380V!)
Rated output power: 1000 W
Step/Dir or Analog input or Internal Position Controller (PR mode
Position/Speed/Torque modes or mixed modes(Position and Speed etc) or Internal Position Controller
Auto-tuning of PID gains (see image) (ASDA Soft available for free download)
No programming Cable is required, it works via USB, cable included with delivery
Dimensions (Lenght x Width x Height) 162x60x156 mm

Applications :

Servo axis , mode stepper positioning with close loop, high speed

Servo axis , mode +/-10 volt speed or tork  with close loop, high speed

Servo axis , with digital servo CNC in CanOpen

Direct Feedback on motor or feedback by mesuring on axis (A,A/,B,B/) for very high precision